Maxim Semiconductor is a leading technology innovation company that can provide more than 5,400 kinds of equipment. Global patents, world-class design chain and supply chain solutions.
JYWY currently has a large inventory of some of MAXIM‘s products. JYWY accepts orders for its full range of products, and Provide comprehensive technical support!Welcome click here to contact us for more information and discount!

MAX14750_MAX14720 Maxim Integrated Compact Power Management Solution
Applications/Uses
Portable Medical Devices
Wearable Fitness Devices
Wearable Medical Devices
MAX14750_MAX14720 Maxim Integrated Compact Power Management Solution

Key Features
Extended System Battery Use Time
Micro-IQ 250mW Buck-Boost Regulator
Input Voltage from 1.8V to 5.5V
Output Voltage Programmable from 2.5V to 5V
1.1µA Quiescent Current
Programmable Current Limit
Micro-IQ 200mA Buck Regulator
Input Voltage from 1.8V to 5.5V
Output Voltage Programmable from 1.0V to 2.0V
0.9µA Quiescent Current
Micro-IQ 100mA LDO
Input Voltage From 1.71V to 5.5V
Output Programmable From 0.9V to 4.0V
0. 9µA Quiescent Current
Configurable as Load Switch
Extend Product Shelf-Life
Battery Seal Mode (MAX14720)
120nA Battery Current
Power Switch On-Resistance
250mΩ (max) at 2.7V
500mΩ (max) at 1.8V
Battery Impedance Detector
Easy-to-Implement System Control
Configurable Power Mode and Reset Behavior (MAX14720)
Push-Button Monitoring to Enable Ultra-Low Power Shipping Mode
Disconnects All Loads From Battery and Reduces Leakage to Less than 1µA
Power-On Reset (POR) Delay and Voltage Sequencing
Individual Enable Pins (MAX14750)
Voltage Monitor Multiplexer
I2C Control Interface
Description:
The MAX14750 works well as a companion to a charger or PMIC in rechargeable applications. It provides direct pin control of each function and allows greater flexibility for controlling sequencing.
The devices include two programmable micro-IQ, high-efficiency switching converters: a buck-boost regulator and a synchronous buck regulator. These regulators feature a burst mode for increased efficiency during light-load operation.
The low-dropout linear regulator has a programmable output. It can also operate as a power switch that can disconnect the quiescent load of system peripherals.
The devices also include a power switch with battery-monitoring capability. The switch can isolate the battery from all system loads to maximize battery life when not operating. It is also used to isolate the battery-impedance measurements. This switch can operate as a general-purpose load switch as well.
The MAX14720 includes a programmable power controller that allows the device to be configured either for use in applications that require a true off state or for always-on applications. This controller provides a delayed reset signal, voltage sequencing, and customized button timing for on/off control and recovery hard reset.
Both devices also include a multiplexer for monitoring the power inputs and outputs of each function.
These devices are available in a 25-bump, 0.4mm pitch, 2.26mm x 2.14mm wafer-level package (WLP) and operate over the -40°C to +85°C extended temperature range.
Typical Application Circuit:
Related products